Setting Oven Controls; To Set The Clock; To Set The Minute Timer - Electrolux ES200/300 Use And Care Manual

Es200/300 controls, self-cleaning oven with coil surface element
Table of Contents

Advertisement

To Set the Clock

When the range is first plugged in, or when the power supply to the range has been interrupted, the display will flash "12:00".
1. Press
.
2. Within 5 seconds, press and hold the
Note: The clock cannot be changed during any timed bake or self-clean cycle.

To Set the Minute Timer

1. Press
.
2. Press the
to increase the time in one minute increments. Press and hold the
increments. The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes.
Note: If you press the
3. The display shows the timer count down in minutes until one minute remains. Then the display will count down in seconds.
4. When the set time has run out, the timer will beep 3 times. It will then continue to beep 3 times every 60 seconds until
is pressed.
Note: The minute timer does not start or stop cooking. It serves as an extra timer in the kitchen that will beep when the set
time has run out. The minute timer can be used alone or during any of the other oven functions. When the minute timer is in
use with any other function, the minute timer will be shown in the display. To view other functions, press the pad for that function.
To Change the Minute Timer while it is in use:
While the timer is active and shows in the display, press and hold the
To Cancel the Minute Timer before the set time has run out: Press
Note: To turn the time of day display OFF or ON in the display press
once) and then release.

Setting Oven Controls

Note: The time of day must first be set in order to operate the oven.
or
first, the timer will advance to 11 hours and 59 minutes.
until the correct time of day appears in the display.
or
.
and hold for 15 seconds (the control will beep
8
to increase the time in 10 minute
to increase or decrease the time.

Advertisement

Table of Contents
loading

Table of Contents