Table of Contents
Advertisement
Setting the Clock and
Minute
Timer
(some models)
a
@
: Flashing indicates
Minute
Timer mode
Your model
may be equipped
with
the clock shown
below.
Follow the
instructions
to set the clock and minute timer on your range. Not all manual
clean ranges are equipped with a clock.
To Set the Clock
When the range is first plugged in, or when the power supply to the range has
been interrupted,
"I 2:00" will flash in the display window.
I.
Push 8"
2.
Push
in and
hold_
or[_
until
the
correct
time
appears
in the
display._'_
Advances time,_
reverses time.
To
I.
Set the
Minute
Timer
Push _,
"0:00" will appear in the display window.
The timer can be set
for any amount of time from 00:01 minute to 12:00 hours.
2.
Push in and hold[_
until the correct amount of time appears in the
display._
Advances time,_
reverses time. The minute timer will
automatically
start when the button
is released. The ":" will flash to
indicate Minute Timer mode.
3.
When the set time has passed, the control will display"0:00"
and beep three
times. The timer will continue to beep until_
is pressed.
4.
Push[_
to cancel the timer and return to the clock mode.
7
Advertisement
Table of Contents
