Table of Contents
Advertisement
Viewer authentication: if this option is enabled, a user should enter user name and
password to view camera image via third-party players such as Quick Time, VLC, etc.
Image size: allows you to set the following image resolution: 640x480, 320x240, 160х120.
Sets image resolution for connections via software and is not applied to image at the main page.
The default value is 640х480.
Frame rate: allows you to set MJPEG streaming rate in frames per second. The following
values are available: 1, 2, 3, 4, 5, 7, 10, 15 frames per second.
Quality: allows you to set the video stream quality. The default value is the [Fixed quality].
Auto: the camera automatically adjusts image quality and frame rate depending on
bandwidth. If the bandwidth decreases, the camera automatically changes image quality
but keeps the frame rate constant.
Fixed quality: this option allows you to select any of the following quality levels:
[Excellent], [Detailed], [Good], [Standard], and [Medium].
NOTE:
See the Appendix A for the detailed information about the [Fixed quality]
6.3. Network
The [Network] menu contains the following sections: [Information], [PPPoE], [DDNS],
[UPnP], [Bonjour], and [IP Notification] (Pic. 6.20). Each of these sections is discussed later in
this Manual.
N6603 Operations User Manual
Pic. 6.19
Chapter 6. SETTING: Basic
.
38
Advertisement
Table of Contents
