Wps - Beward N13201 Operation User's Manual

Use the following IP address: manual assigning an IP address.
IP Address: enter the required IP address.
Subnet Mask: enter the required subnet mask.
Default Gateway: enter the IP address of a default gateway.
Use the following DNS server address: select this option to specify DNS servers'
addresses manually.
 DNS server 1: enter the primary DNS server IP address.
 DNS server 2: entrer the secondary DNS server IP address.
IMPORTANT:
IP addresses of wired and wireless connections should not be the same. It is strongly recommended to
use fixed IP address for stable work.

8.1.4. WPS

This menu is for semi-auto setting of Wi-Fi wireless connection with the help of WPS
technology (Wi-Fi Protected Setup) (Pic. 8.7). Use a cable connection for connection setting, after
finishing you can use wireless connection as well as wired.
IMPORTANT:
If this option is [On] then the connection to the camera can be set without wired connection. Firstly, press
[WPS] button on the device to which you want to connect the camera and then press the [WPS] button on
the camera case. After that, wireless connection between two devices will be established automatically in
2 minutes.
N13201 Operations User Manual
Chapter 8. The [SETTING] Menu: Network
40