Verifying The Wireless Network Configuration Without Using Wps - Beward N13103 Installation & User Manual

The camera takes 2-3 minutes to reboot.
This completes the setting up of the wireless connection.

6.3.3. Verifying the Wireless Network Configuration without Using WPS

To verify the wireless network settings of your camera and your computer, you must access
the camera through Internet Explorer.
Launch Internet Explorer. To do so, go to Start – All Programs and click [Internet
Explorer].
In the address field, enter the IP address for wireless connection that is assigned to your
camera (Pic. 6.18).
IMPORTANT!
To verify the wireless network configuration, use the IP address that was assigned to your camera in
paragraph 6.3.2.
Enter the camera's user name and password, then click [OK] (Pic. 6.19).
IMPORTANT!
The default user name is admin, the default password is admin.
N13103 Installation User Manual
Chapter 6. Establishing and Configuring the Wi-Fi Connection
Pic. 6.18
53