Table of Contents
Advertisement
5.7. Verifying the Connection Settings
To verify the network settings of your camera and your computer, you must access the
camera through Internet Explorer.
Launch Internet Explorer. To do so, go to Start – All Programs and click [Internet
Explorer].
Enter the IP address of your camera in the address field (e.g. http://192.168.1.99) (Pic.
5.41).
If the settings are correct, an authorization window will appear. Enter the camera's user
name and password, then click [OK] (Pic. 5.42).
IMPORTANT!
The default user name is admin, the default password is admin.
N1000 Installation User Manual
Chapter 5. Setting Up the Wired Connection for Windows 7
Pic. 5.41
Pic. 5.42
36
Advertisement
Table of Contents
