Verifying The Connection Settings - Beward N300 Installation & User Manual

Ip camera

Hide thumbs Also See for N300:

Table of Contents

If the IP settings were specified manually, use the [Use the following IP address] and the

[Use the following DNS server addresses] options and complete the required fields (see

paragraph 5.1), then click [OK] (Pic. 5.35).

5.7. Verifying the Connection Settings

To verify the network settings of your camera and your computer, you must access the

camera through Internet Explorer.

To launch Internet Explorer go to Start – All Programs and click [Internet Explorer].

Enter the IP address of your camera in the address field (e.g. http://192.168.0.99) (Pic. 5.36).

If the settings are correct, an authorization window will appear. Enter the username and

password, then click [OK] (Pic. 5.37).

N300 Installation User Manual

Chapter 5. Setting Up the Wired Connection for Windows 7

Pic. 5.35

Pic. 5.36

Table of Contents