Dalsa SG-10-01k80 User Manual page 88

88
Exposure Mode:
SYNC Frequency:
Exposure Time:
CCD Direction:
Horizontal Binning:
Video Mode:
Region of Interest:
End-Of-Line Sequence:
FFC Coefficient Set:
03-032-10158-04
PRELIMINARY
2
5000 Hz
200 uSec
internal/forward
1
video
(1,1) to (1024, 1)
on
0
Spyder3 GigE User Manual
Current exposure mode
value set with the
s em
1 2 2 H
command. See section
A 1.4 Exposure Mode,
2 9 7 H
Line Rate and Exposure
Time for details.
Current line rate. Value
is set with the
s sf
1 2 3 H
command. See section
A 1.4 Exposure Mode,
2 9 8 H
Line Rate and Exposure
Time for details.
Current exposure time
setting. Value is set
with the command.
s et
1 2 4 H
See section A 1.4
2 9 9 H
Exposure Mode, Line
Rate and Exposure
Time for details.
Current direction
setting set with scd
command. Refer to
section A 1.2 CCD Shift
3 0 0 H
Direction for details.
Current horizontal
binning factor set with
the sbh command.
Current video mode
value set with the
s vm
1 2 5 H
command. See section
A 4.1 Generating a Test
3 0 1 H
Pattern for details.
Region of interest size
set with the
r oi
1 2 6 H
command. See section
A 2.1 Setting a Region of
3 0 2 H
Interest (ROI) for
details.
States whether an end
of line sequence is
turned on or off. Set
using the
e ls
1 2 7 H
command. See section
A 2.3 End-of-line
3 0 3 H
Sequence for details.
Current pixel coefficient
set loaded. Refer to
section A 3.1 Saving and
3 0 4 H
Restoring PRNU and
FPN Coefficients for
details.
DALSA