34
Figure 15: Command Tab after Sending the sem (Set Exposure Mode) Command
Configuration Window Method:
1.
2.
3.
4.
The Port Communication tab provides an ASCII interface. In order to comply with
DALSA camera command protocol, you must send and receive as ASCII and ensure that
the CR checkbox is checked (default).
Figure 16: Port Communication Tab after Sending the h (Help) Command
03-032-10158-04
PRELIMINARY
Open QuickCam. Refer to section
running the application.
In the Camera Configuration Window:
Open the Exposure/GPIO tab.
Click Advanced...
Open the Port Communication tab.
3 .1 QuickCam Interface for details on installing and
2 4 3 H
Spyder3 GigE User Manual
DALSA