Spyder3 GigE User's Manual
Note: Refer to the following sections for details on equipment recommendations and camera
connector information.
DALSA
PRELIMINARY
4
GPIO Connector
If using an external sync, external direction
control or any other external signals,
connect the GPIO.
5
Connect Ethernet cable.
Connect Cat 5 or Cat 6 cable from camera
to computer Ethernet jack.
6
Connect power cable.
Connect power cable from camera to +12
V to +15 V power supply.
4
7
Open QuickCam.
On the Windows task bar click ,
to
Programs—DALSA
QuickCam—DALSA QuickCam
.
8
Confirm or enter your IP Address.
In the
Set Camera's IP Adress
confirm or enter the camera's IP Address.
Click
OK
.
9
Start acquiring images.
On the QuickCam toolbar, click the
Continuous Grab
icon. The image should
be visible in the Image Output window.
Start
point
dialog box,
19
03-032-10158-04