Table of Contents
Advertisement
4. On the Chart page the ShuttlePoint knob is used to pan around the chart. Move the
ShuttlePoint knob to the left and you will notice a cross hair
cursor.
5. When you move the ShuttlePoint knob you will notice DST and BRG values in the data
window change. This shows the Distance and Bearing from the GPS Fix of your vessel
to the position of the Cursor.
6. If the cursor is moved to the edge of the screen the GPS Chart Plotter will automatically
pan in the desired direction.
3.1.1
Cursor Vs. Home Mode
Cursor Mode
When the
cursor is shown on the Chart page, the GPS Chart Plotter is in Cursor Mode.
In Cursor Mode the position of the vessel will not stay in the center of the page and will move
right off the edge of the screen (as your boat moves). Cursor Mode allows you to pan around
and look at areas on the chart. In this mode you can also create Marks, Routes, measure
Distance and Bearings from your current position.
Home Mode
When the
ship icon is shown on the Chart page (cursor is not shown) you are in Home
Mode. Now as the ship moves through the water the vessel's position will be kept in the
center of the display.
To change from Cursor Mode to Home Mode press [CLR].
3.1.2
Cursor and Menu selection speed
The CP190i and CPF190i allow you to control the speed the Cursor moves when the
ShuttlePoint knob is pressed. To change the speed:
1. Press [MENU], move the ShuttlePoint knob to highlight SETUP MENU and press
[ENT].
2. Move the ShuttlePoint knob to highlight GENERAL SETUP and press [ENT] or move
the ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight CURSOR SPEED and press [ENT] or move the
ShuttlePoint knob to the right.
4. The menu now shows two selections, Chart and Menu which allow the Cursor Speed
to be selected as High, Medium or Low on the Chart page or within the menus.
5. With CHART or MENU selected, press [ENT] or move the ShuttlePoint knob to the right.
CP190i and CPF190i
NOTE
Figure 3.1.2 - Cursor Speed menu
appears, this is called the
Page 29
Advertisement
Table of Contents
