Table of Contents
Advertisement
All selections are listed in the following table:
TIME SETUP
DATE FORMAT
COURSE UP/NORTH UP
KEYPAD BEEP
UNITS OF MEASURE
NAV AIDS PRESENTATION Allows the Nav Aids presentation to be drawn using NOAA symbology when US (default)
DISPLAY COLOR
SHIP ICON
CURSOR SPEED
MEASURE DISTANCE
WINDOWS SETUP
LANGUAGE
AUTO INFO
CP190i and CPF190i
Select the Time Zone offset, enable or disable Daylight Savings Time and select the
Time Format and switch between 12 or 24 hours time format.
Select the Date format among MM-DD-YY (default), DD-MM-YY or YY-MM-DD.
Select North Up (the top of the page is fixed to North) or Course Up (the top of the page
is orientated to the direction the vessel is heading. This is the default).
Allows the beep produced when a key is pressed to be turned On (default) or Off.
Units of Measure can be selected for Distance, Speed, Depth, Altitude and Temperature:
Distance: selections are Nm (Nautical Miles), Sm (Statue Miles), Km (Kilome-
tres), Nm+Mt, Nm+Ft. Note when "Nm+Ft" is selected if the distance is less
than 1.0 Nm, it turns to Ft. When "Nm+Mt" is selected if the distance is less than
1.0 Nm, it turns to Meters.
Speed: selections are Kts (knots), MPH (miles per hour), Kmh (kilometre per
hour).
Depth: selections are Ft (feet), FM (fathoms) and Mt (meters).
Altitude: selections are Ft (feet) and Mt (meters).
Temperature: selections are F (Fahrenheit) and C (Celsius).
is selected or International symbols when International is selected. When selected these
functions affect how the icons for Lights, Signals, Buoys and Beacons are displayed.
Changes the background colors of the chart page to enhance the visibility of the screen
depending on the surrounding light conditions. Normal is recommended when the GPS
Chart Plotter is not exposed to the direct sunlight. When this mode is set the charts are
displayed in order to use colors as similar as possible to ones used in the original paper
charts. Classic uses vivid chart colors presentation. NOAA allows setting NOAA paper
chart colors presentation. Night is recommended when the environment is dark in order
to reduce the glare of the display. The GPS Chart Plotter displays charts and screen in
darker colors. Sunlight (default) is designed to enhance the visibility of the screen when
the GPS Chart Plotter is exposed to sunlight. The charts are much brighter than in the
other modes and the depth areas are filled with the white color so different depth areas
are not easily distinguishable.
Select from a variety of Ship Icons that represent your vessels position on the Chart page.
The default is Icon 6.
Selects the speed among Low, Medium (default) and High for the cursor in the CHART
page and within the MENU.
When this function is On, and the ShuttlePoint knob is moved to a location where you want
to start measuring a distance and press [ENT]. Move the ShuttlePoint knob to move the
cursor to a second location where you want to finish measuring a distance and press
[ENT]. A line will appear between the Start and Finish points and a popup window will be
shown indicating the distance and bearing from the Start and Finish points. Press [ENT]
to delete both points. Off is the default.
This menu selection allows the data windows to be customized on the CHART PAGE and
NAVIGATION PAGE (refer to Par. 12.0.0).
Allows changing the language for menus and data screens.
When the cursor is moved over a buoy, Mark or other item a popup window will show
information of the item. This menu item allows the window to be turned Off, On Points
(default) or On All.
Page 35
Advertisement
Table of Contents
