Table of Contents
Advertisement
· The GPS Chart Plotter is designed for maritime use. To avoid water intrusion, ensure
the C-MAP B
Y
· Extensive exposure to heat may result in damage to the GPS Chart Plotter.
· The GPS Chart Plotter contains dangerous high-voltage circuits which only experien-
ced technicians can handle.
· STANDARD HORIZON will not be liable for errors contained herein, or for incidental
or consequential damages in connection with the performance or use of this material.
· Because we frequently update our software and applications, the pictures shown
through this Owner's Manual may be slightly different from what you see.
CLEANING PROCEDURE FOR THE GPS CHART PLOTTER SCREEN
Cleaning of the chart plotter screen is a very important operation and must be done
carefully. Since the surface is covered by a antireflective coating, the procedure for
cleaning all the surfaces can be performed using the following procedure: Use a
clean, soft, lint-free cloth to clean the glass. We recommend using a micro-fiber
cloth. Spray a small amount of ammonia-free cleaner (isopropyl alcohol) onto the
cloth. Spraying on the cloth will prevent overspray. Fold the cloth or lens cloth into
a triangular shape, moisten the tip and use the index finger behind a corner to move
the cloth across the surface in overlapping side to side strokes. If the cloth is too wet,
a noticeable wet film will be left in its path and you will need to repeat the process.
If too dry, the cloth won't glide easily, and may damage the surface.
CP190i and CPF190i
J
C-CARD door is completely closed.
EPPESEN
CAUTION
Page 5
Advertisement
Table of Contents
