Displaying The Fish Finder Page - Standard Horizon CP190i Owner's Manual

Fish
Fish are usually represented by small dots on the display when using 200kHz and by
arches when using 50kHz.
Thermoclines
Are the zones where two layers of different water temperatures meet. The greater the
temperature differential, the denser the thermocline shows on the screen. Thermo-
clines are represented as horizontal stripes of noise. They are very important for fishing
since often many species of game fish like to suspend in, just above, or just below the
thermoclines.
White Line
The White Line shows the difference between hard, soft bottoms and even distinguish-
es between fishes and structures located near the bottom. In this way it is easier to tell
the difference between a hard and soft bottom and even to distinguish fishes and
structures located nearby the bottom.
Surface Clutter
Appears like noise at the top of the screen extending many feet below the surface. It's
caused by many things, including air bubbles, bait fish, plankton and algae.
Structures
Generally, the term "structure" is used to identify objects like wrecks and weeds rising
from the bottom.
Bottom Echo Profile
Bottom profile recorded by the Fish Finder. When the echo sounder is set in Auto
Range mode, the bottom is kept in the lower half in the display.
17.2

DISPLAYING THE FISH FINDER PAGE

This section explains how to show and customize the selection of the Fish Finder display
pages.
1. From all pages (except the Fish Finder page), press [MENU].
From Fish Finder page, press [MENU] two times.
2. Move the ShuttlePoint knob to highlight RADAR/FISH and press [ENT].
Page 114
Figure 17.2 - Main Menu
CP190i and CPF190i