Program 810 - Descriptor Programming - Sam4s ER-420M Operation And Program Manual

Program 810 - Descriptor Programming

Program descriptors by typing descriptors on the alpha keyboard overlay or by entering three
digit alpha character codes. To program descriptions by three digit alpha character codes you
must select 'N' in system option #25(See "System Option Programming").
152 • Program Mode Programming
1. Turn the control lock to the P position.
2. To begin the program, enter 8 1 0, press the SBTL key.
8 1 0
3. Enter the number (1-15) of the clerk you wish to program; press the X/TIME
key.
X/TIME
4. If you are programming using alpha overlay;
Type up to 18
descriptor keys
or,
Enter up to 18
three-character
codes
5. Press the CASH key to finalise the program.
CASH
SBTL
SBTL
SBTL
ER-420M