Program 610 - Mix & Match Descriptor Programming - Sam4s ER-420M Operation And Program Manual

Program 610 - Mix & Match Descriptor Programming
Program descriptors by typing descriptors on the alpha keyboard overlay or by entering three
digit alpha character codes. To program using three digit alpha character codes you must
select 'N' in system option #25(See "System Option Programming").
ER-420M
1. Turn the control lock to the P position.
2. To begin the program, enter 6 1 0, press the SBTL key.
6 1 0
3. Enter the number of the M&M table you wish to program; press the X/TIME
key.
X/TIME
4. If you are programming
Type up to 18
descriptor keys
or,
Enter up to 18
three-character
codes
5. Press the CASH key to finalise the program.
CASH
SBTL
SBTL
SBTL
Program Mode Programming • 155