Overview; Table Management And Clerk Interrupt Operations - Sam4s ER-420M Operation And Program Manual

Table Management and Clerk Interrupt Operations

Overview

The ER-420M series can employ a manual previous balance, hard check, or soft check
system. (You must select hard or soft check posting in memory allocation programming - the
default selection is soft.)
There are two methods in ER-420M series to manage check track. One is table management
system and the other is clerk interrupt system. If you want to use clerk interrupt system.
First, Program as below.
To Enter Clerk Interrupt System (To Exit Table Management system )
To Exit Clerk Interrupt System(To Enter Table Management system)
ER-420M
1.Program Clerk Secret Code
2.Set system option #2 to a value of 1. See "System Option Programming"
3.Set system option #26 to a value of 1. See "System Option Programming".
Set system option #26 to a value of 0. See "System Option Programming" .
Operating Instructions • 59