Program 810 - Clerk Description Programming
Program descriptors by typing descriptors on the alpha keyboard overlay or by entering three
digit alpha character codes. To descript by three digit alpha character codes you must select
'No' in system option #25(See "System Option Programming").
140 • Program Mode Programming
1. Turn the control lock to the P position.
2. To begin the program, enter 8 1 0, press the SBTL key.
8
1
0
3. Enter the number (1-15) of the clerk you wish to program; press the X/TIME
key.
X/TIME
4. If you are programming using alpha overlay;
Type up to 18
descriptor keys
or,
Enter up to 18
three-character
codes
5. Press the CASH key to finalise the program.
CASH
SBTL
X/TIME
SBTL
ER420 Series