Currency Conversion - Function Key Programs - Sam4s ER-420M Operation And Program Manual

CURRENCY CONVERSION - Function Key Programs

Currency Conversion Rate - Program 90
Currency Exchange Rate Programming Examples
Note: Foreign currency exchange rates may be stated as "foreign currency in euros ". Use
the rate stated in "Sterling in foreign currency" when you are programming this section.
The £1.00 is worth 63 Euros (foreign currency).
1
ER-420M
1. Turn the control lock to the P position.
2. To begin the program, enter 9 0, press the SBTL key.
9 0 SBTL
3. Enter the exchange rate of up to 7 digits (do not enter the decimal point), then
enter a number from 0 to 7 to indicate the decimal position. See "Currency
Exchange Rate Programming Examples" below.
Exchange Rate
4. Press the function key on the keyboard you wish to program.
FUNCTION
KEY
5. To program additional function keys, repeat from step 2, or press the CASH
key to finalise the program.
CASH
3 7 2 0
Exchange Rate
4
Decimal
Position
Decimal
Position
Program Mode Programming • 123