Euro Rounding Programming - Sam4s ER-420M Operation And Program Manual

EURO Rounding Programming

ER-420M
1. Turn the control lock to the P position.
2. To begin the program, enter 1 9 0 0, press the SBTL key.
9 0
1
3.Enter the number (1-100) of the End., press the X/TIME key.
X/TIME
4. Enter the number (1-100) of the value, press the X/TIME key.
X/TIME
5. Repeat steps 3 - 4 five times if there are 5 level euro rounding table.
6. When you program all successfully, The program automatically ends.
0 SBTL
Program Mode Programming • 173