Memory Allocation - Sam4s ER-420M Operation And Program Manual

Ram Clear & Memory Allocation
ER-420M
1. Turn the key to the S Mode and power on the register whilst holding the
CHEQUE key. Then press the top left, bottom left, top right, bottom right
keys to start the memory allocation procedure.
If you want to allocate memory by default value, Press CASH key only.
Refer to the chart below . Enter the index number and press the X/TIME key.
X X/TIME
X MEMORY ITEM
1
PLU
2
CLERK
3
GROUP
4
CHECK#
5
SOFT CHECK LINE
6
CHECK TYPE : Hard(1), Soft(0)
7
PRICE LEVEL
8
MIX AND MATCH
2. Enter the Number to allocate for the Memory Item and Press CASH key.
See the example data table below
N CASH
MEMORY ITEM
PLU
CLERK
GROUP
CHECK #
SOFT CHECK LINE
CHECK TYPE
PRICE LEVEL
MIX AND MATCH
Default Memory Allocation
3. If you want to finish memory allocation, Enter CASH key with no numeric key
input. And if you want to allocate another memory area, Repeat the file number
allocation sequence
CASH
N
1000 (Max. 8000)
15 (Max. 99)
20 (Max. 99)
20 (Max. 500)
50 (Max. 100)
0(Soft Check), 1(Hard Check)
1 (Max. 2)
20 (Max. 99)
Service Mode Programming • 73