WHEEL INSPECTION/
SPOKE INSPECTION AND TIGHTENING
WHEEL INSPECTION
1. Inspect:
NOTE:
Always balance the wheel after the replacement
or reassembly of a tyre or rim.
Never try to repair a rim in any way.
Bearing inspection
Check the front and rear wheel bearings periodi-
cally to make sure that they do not have free play
in the hub and that the wheel turns smoothly with-
out sticking. Wheel bearings must always be
checked in accordance with the maintenance
table.
SPOKE INSPECTION AND TIGHTENING
1. Inspect:
2. Tighten:
NOTE:
Tighten the spokes before and after the break-in
period.
3-44
•
Wheels
Damage/Deformation
WARNING
•
Spokes (1)
Curvature/Damaged
Loose spoke
Tighten.
•
Spoke (s)
Spoke:
3 Nm (0.3 mkg)
INSP
ADJ
Replace.
Replace.