ENGINE ASSEMBLY AND SETTING
ENGINE OIL STRAINER
1. Install:
•
•
WARNING
Always use a new gasket.
CRANKCASE
1. Apply:
•
2
Install:
•
3. Assemble the left crankcase to the right. Beat
gently with a soft hammer.
NOTE:
Turn the shift cam as shown in the figure so that
it does not interfere with the crankcase during
assembly.
CAUTION:
Before installing and tightening the fastening
screws, be sure that the transmission is work-
ing properly by hand, turning the shift cam in
both directions.
5-51
Oil strainer (1)
Oil passage cover (2)
Screw (oil strainer):
7 Nm (0.7 mkg)
Screw (oil passage cover):
7 Nm (0.7 mkg)
Yamaha bond N° 1215 ® (1)
(on the crankcase mating surfaces)
Yamaha bond N° 1215 ® :
P/N. 90890-85505
Dowel pin (2)
ENG