Yamaha TT600R Service Manual page 164

1
FRONT FORK
2
3. Insert an Allen key in the bolt (3) at the bottom
of the outer tube and the special tool (1) with
the holder (2) on the damper cylinder assem-
bly and unscrew the bolt completely.
CAUTION:
Before unscrewing the bolt ensure that the
end of the damper rod holder is correctly
engaged on the damper cylinder assembly.
T-handle (1):
90890-01326
Front fork damper rod holder (2):
90890-01460
4. Remove:
•
Damper cylinder assembly (from inner
tube)
5. Clean the inside of the outer tube and the out-
side of the damper cylinder assembly with
petrol.
CAUTION:
Taking care not to let petrol enter the inside of
the damper cylinder assembly as it would
seriously compromise its functioning.
4-51
CHAS
3