Yamaha TT600R Service Manual page 14

Tool No.
Rocker arm shaft puller bolt
90890-01083
These tools are used when removing the
rocker arm shafts.
Weight
90890-01084
These tools are used when removing the
rocker arm shafts.
Valve spring compressor
90890-04019
These tools are used when removing or
installing the valve and the valve spring.
7 mm (0.28 in) valve guide puller
90890-01225
This tool is used to remove the valve guides.
7 mm (0.28 in) valve guide installer
90890-04017
This tool is necessary to install the valve
slides properly.
7 mm (0.28 in) valve guide reamer
90890-01227
This tool is used to re-ream the new valve
guide.
Valve adjusting tool
90890-01311
This tool is necessary for adjusting valve
clearance.
Rotor holder
90890-01701
This tool is used for loosing and tightening
the rotor nut.
Rotor screw puller
90890-01362
This tool is used to disassemble the magne-
to flywheel rotor.
Tool name / Usage
1-6
SPECIAL TOOLS
Illustration
GEN
INFO