2
3
AIR FILTER CLEANING
AIR FILTER CLEANING
1. Remove:
1
•
•
2. Pull out:
•
3. Wash:
•
NOTE:
Rinse properly and dry perfectly by squeezing the
filtering element, without twisting it!
4. Inspect:
•
5. Apply:
•
6. Squeeze out:
•
NOTE:
The filtering element should be wet but not drip-
ping.
7. Install:
4
•
NOTE:
When installing the filtering element in its case, fol-
low the direction indicated by the arrows, make sure
that the flame-trap net is set forward and that the
cap is properly assembled.
8. Reassemble:
•
•
CAUTION:
Make sure the air filter is properly seated in
the air filter case.
The engine should never be run without the
air filter installed. Excessive piston and/or
cylinder wear may result.
3-24
Fast screws (1)
Air filter box cap (2)
Filtering element (3) from its seat
Filtering
element
(with
biodegradable liquid soap)
Filtering element
Damaged ➔ Replace.
SAE 20W50 engine oil or special filter oil
all over filter surface
Excess oil
Filtering element (4) in its case
Air filter box cap
Fast screws
INSP
ADJ
water
and