Yamaha TT600R Service Manual page 279

ENGINE REASSEMBLY
4. Install:
•
Oil delivery hose (1)
Union bolt:
18 Nm (1.8 mkg)
5. Remove:
•
Tappet cover (intake)
•
Air bleeder screw (oil filter cover)
6. Apply:
•
4-stroke engine oil
•
(on the top side of the camshaft and in the
oil filter housing).
CAUTION:
Liberally apply 4-stroke engine oil in the oil
passage in the crankcase to prevent damage
to the engine.
Amount of oil:
Camshaft
0.1 litres
Oil filter housing
0.06 litres
7. Install:
•
Tappet cover (intake)
•
Air bleeder screw (oil filter cover)
Screw (tappet cover):
10 Nm (1.0 mkg)
Air bleeder screw (oil filter cover):
5 Nm (0.5 mkg)
8. Adjust:
•
Clutch cable free play
Free play (at end of lever):
10 ~ 15 mm
See section "CLUTCH ADJUSTMENT" in
CHAPTER 3.
5-77
ENG