ENGINE OIL REPLACEMENT
Fastening torques:
Drain plug (engine):
30 Nm (3.0 mkg)
Oil tank hose (flange):
10 Nm (1.0 mkg)
Oil filter cover air bleeder screw:
5 Nm (0.5 mkg)
9. Fill:
•
Oil tank
Recommended oil:
SAE20W40SE or SAE10W30SE
Refer to the chart for selection of
the oils suited to the atmospheric
temperature.
API Standard:
API SE, SF, SG or higher grade
Oil capacity:
Periodic change = 2.4 litres
CAUTION:
•
Do not put in any chemical additives or
use oils with a grade of CD (a) or higher.
•
Be sure not to use oils labeled "ENERGY
CONSERVING II" (b) or higher. Engine oil
also lubricates the clutch and additives
could cause clutch slippage.
•
Be sure no foreign material enters the
crankcase.
10. Install:
•
Oil tank tap
11. Check:
•
Oil level
See
section
CHECK".
•
Oil pressure
See section "ENGINE OIL PRESSURE
CHECK".
•
Oil leakage
3-18
INSP
ADJ
"ENGINE
OIL LEVEL