Yamaha TT600R Service Manual page 263

ENGINE ASSEMBLY AND SETTING
7. Install:
•
•
•
8. Install:
•
NOTE:
Tighten screws beginning with the one with the
lowest number.
9. Install:
•
•
•
Timing chain installation:
•
Install the cam chain on the cylinder head as
illustrated (compression phase timing).
•
Run the cam shaft in an anticlockwise direc-
tion until the mark on the crankcase (1) and
the point on the cam chain gearwheel (2) are
aligned.
5-61
Dowel pins (1)
O-Ring (2)
Gasket (3) (cylinder head)
Cylinder head
Cylinder head:
Screw (l), (2), (3) and (4):
29 Nm (2.9 mkg)
Nut (5) and (6):
22 Nm (2.2 mkg)
Screw (7):
10 Nm (1.0 mkg)
Chain stopper guide
Camshaft
Cam chain sprocket
ENG