Yamaha TT600R Service Manual page 35

Part to be tightened
Starting motor cord/Starting motor
Wire minus lead (-)/Starting motor
Front flasher lights/Stay, headlight
Clutch wire/Engine
Assist grip (Standing handle)/Rear frame
Speedometer
Air filter case 1/Air filter case 2 (L = 13 mm)
Air filter case 1/Air filter case 2 (L = 19 mm)
Hose clamp/Joint, carburator
Hose clamp/Air cleaner/Carburator
Battery (+)/(-)
NOTE:
1. First tighten the ring nut approximately 38 Nm (3.8 mkg) by using the torque wrench, then loosen the
ring nut one turn.
2. Final tighten the ring nut at the torque of 4 Nm (0.4 mkg).
MAINTENANCE SPECIFICATIONS
Thread
size
M6 x 1.0
M6 x 1.0
M6 x 1.0
M6 x 1.0
M8 x 1.25
M5 x 0.8
M3.9
M3.9
M4 x 0.7
M5 x 0.8
M6 x 1.0
2-16
SPEC
Tightening
torque
Remarks
N · m m · kg
11 1.1
10 1.0
1.5 0.15
7 0.7
23 2.3
4 0.4
0.5 0.05
1 0.1
0.6 0.06
0.8 0.08
2.5 0.25