INSPECTION AND REPAIR
BALANCER SHAFT DRIVE AND DRIVEN
GEARS
1. Inspect:
•
Drive gear teeth (1)
•
Driven gear teeth (2)
Wear/damage
2. Check:
•
Marks (1)
If they are not aligned
as shown in the figure.
CRANKCASE
1. Inspect:
•
Crankcase
•
Bearing housing
Damaged
BEARING AND OIL SEAL
1. Inspect:
•
Bearing
Roughness/Pitting/Damage
•
Oil seal edge
Damage/Wear
5-40
ENG
Replace both gears.
Align the marks
Replace.
Replace.
Replace.