Replacing The Turn Indicator Light Bulb - Yamaha TT600R Service Manual

REPLACING THE TURN INDICATOR LIGHT BULB

2
1
3
4. Install:
•
Bulb (new) (by pushing it in and turning it
clockwise)
•
Bulb holder
•
Upper side of the cowling (onto the meter
bracket)
•
Headlight (adjust the headlight beam if
necessary)
5. Install:
•
Cowling screws
Cowling screws:
10 Nm (1.0 kgm)
REPLACING THE TURN INDICATOR LIGHT
BULB
1. Remove:
•
Lens screw (1)
•
Lens (2)
•
Bulb (3)
NOTE:
To remove the bulb press it into place and turn it
counterclockwise.
2. Install:
•
New bulb
NOTE:
To install the bulb press it into place and turn it
clockwise.
•
Lens
•
Lens screw
CAUTION:
Do not overtighten the screw, otherwise the
lens may break.
3-56
INSP
ADJ