Yamaha TT600R Service Manual page 273

ENGINE ASSEMBLY AND SETTING
CLUTCH
1. Install:
•
•
•
2. Install:
•
•
•
•
•
•
•
•
•
•
•
•
•
NOTE:
•
To tighten the nut (clutch boss), lock the clutch
drum with the special tool (14).
•
Bend the lock washer tab along the face of the
nut.
WARNING
Always use a new lock washer.
5-71
Plain washer
Spring
Push lever (1)
Screw (push lever):
12 Nm (1.2 mkg)
Push rod (1)
Primary driven gear comp. (2)
Thrust plate (3)
Clutch boss (4)
Lock washer (5)
Nut (6) (clutch boss)
Clutch boss spring (7)
Clutch plate (8)
Friction plate (9)
Ball (10)
Pressure plate (11)
Compression spring (12)
Screw (pressure plate) (13)
Nut (clutch boss):
90 Nm (9.0 mkg)
Pressure plate screw:
8 Nm (0.8 mkg)
Clutch holding tool:
P/N. 90890-04086
ENG