ENGINE ASSEMBLY AND SETTING
4. Tighten:
•
NOTE:
Tighten the screws beginning with the one with
the lowest number.
5. Apply:
•
6. Check:
•
SHIFT SHAFT AND OIL PUMP
1. Install
•
•
•
NOTE:
Place the stopper lever and the spring in the cor-
rect position.
2. Install:
•
•
•
•
5-52
Screws (crankcase) (1) ~ (14)
Screw (crankcase):
10 Nm (1.0 mkg)
4-stroke engine oil
(to the connecting rod pin, the bearing and
the oil passage).
Gearbox and transmission functioning
Jerky functioning
Replace.
Spring (1)
Collar (2)
Stopper lever (3)
Stopper lever screw (4):
10 Nm (1.0 mkg)
Plate washer (1)
Spring (2)
Shift lever (3)
Circlip (4)
ENG