Engine Oil Replacement - Yamaha TT600R Service Manual

3
4

ENGINE OIL REPLACEMENT

ENGINE OIL REPLACEMENT
CAUTION:
Do not put additives into the engine oil. The
latter also lubricates the clutch and additives
might cause it to slide.
WARNING
Never remove the oil tank cap when the
engine is hot. The boiling oil might spill over,
causing burns. Wait for the oil to cool to at
least 60°C (140°F) or thereabouts.
Engine oil replacement (without replacing filter
oil)
1. Warm up the engine for a few minutes.
2. Stop the engine. Place an oil pan under the
engine and remove the oil filler cap.
3. Remove the drain plug (1) and drain the
engine oil.
4. Remove two bolts (2) and O-ring of the oil
hose flange, and drain the oil from oil tank.
5. Remove the air bleed screw (3) attached to
the oil filter cover (4).
6. Wait until the oil has completely drained.
7. Inspect:
•
All gaskets
Damaged
8. Reassemble:
•
Oil filter cover bleeder screw
•
Engine oil drain plug
•
Oil tank hose and O-ring
3-17
INSP
ADJ
Replace.