Log In To Netbiter Easyconnect Ec350; Select Login Method; Login - HMS Netbiter EasyConnect EC150 User Manual

Hms netbiter easyconnect gateway user manual

Hide thumbs Also See for Netbiter EasyConnect EC150:

Table of Contents

10.4 Log in to Netbiter EasyConnect EC350

The Netbiter EasyConnect EC350 supports local access via the Ethernet connector and the USB

connector.

USB

Connect a USB Micro B cable between the computer and the Netbiter EasyConnect EC350. After the

device driver is installed, a virtual network card will automatically be created on, as in the example below.

It will then be possible to log in to the unit via a web browser, at the IP address 169.254.200.200, see

below. Note that this IP address applies only to the USB connection.

Ethernet Connection

Connect an Ethernet cable to the WAN socket on the Netbiter EasyConnect EC350, and then log in to

the unit via a web browser. If the IP address is not known, it will first be necessary to obtain this infor-

mation. See section 10.1.1 on page page 47 for details on how to do this.

Typing in the IP address as the URL in a web brows-

er will display the login screen. The default user

name is admin, and the password is the activation

code supplied with the unit - see section 8.2.1.

Netbiter EasyConnect

Doc.Rev. 2.10

Local Configuration 54

Doc.ID. HMSI-168-92

Table of Contents

Do you have a question about the Netbiter EasyConnect EC150 and is the answer not in the manual?