Table of Contents
Advertisement
10.3.6 Local Proxy Setup
1. Log in locally to the Netbiter EasyConnect Gateway as described above.
2. Click Netbiter Argos in the menu.
3. Select the proxy type to use.
4. Enter the proxy server address.
5. Enter the port to use on the LAN side. If blank, this will be set to port 443.
6. Enter the user name and password, if required for the proxy server.
7. Click Save settings.
Netbiter EasyConnect
Doc.Rev. 2.10
Local Configuration 53
Doc.ID. HMSI-168-92
Advertisement
Table of Contents
Need help?
Do you have a question about the Netbiter EasyConnect EC150 and is the answer not in the manual?