Modem Settings - HMS Netbiter EasyConnect EC150 User Manual

10.4.4 Modem Settings

The built-in modem in the Netbiter EasyConnect EC350 communicates via 2G/3G cellular networks,
which requires a SIM card. Using a SIM card from HMS Industrial Networks is the easiest option, but
it is also possible to to use one from another network operator.
Important! - There is no support in the Netbiter EasyConnect EC350 for using a PIN code on
the SIM card. For a SIM card with an active PIN code, the code must first be deactivated by in-
serting the card into a mobile phone and performing the operation there. The PIN code cannot
be deactivated in the Netbiter EasyConnect EC350.
Use Modem as Primary Connection to Argos
Checking this box will cause the modem to always be used for communication as long as there is a good
2G/3G signal available. If the WAN interface is also enabled, this will automatically be used if the
2G/3G connection is not available.
APN (Access Point Name)
This is the identifying name used to connect to a mobile network. The network operator for the SIM
card can supply this information.
User name / Password
If the connection to the mobile network requires a user name and password, enter these here.
After making these settings, click Save settings.
Netbiter EasyConnect
Doc.Rev. 2.10
Local Configuration 56
Doc.ID. HMSI-168-92