Related Manuals for HMS Intesis KNX - Hisense VRF
Summary of Contents for HMS Intesis KNX - Hisense VRF
- Page 1 Hisense VRF Air Conditioning Gateway for the integration of Hisense VRF systems into KNX home automation systems USER MANUAL Issue date: 01/2019 r1.1 ENGLISH...
- Page 2 HMS Industrial Networks reserves the right to modify its products in line with its policy of continuous product development. The information in this document shall therefore not be construed as a commitment on the part of HMS Industrial Networks and is subject to change without notice. HMS Industrial Networks makes no commitment to update or keep current the information in this document.
- Page 3 Gateway for the integration of Hisense VRF systems into KNX home automation systems. ORDER CODE LEGACY ORDER CODE INKNXHIS016O000 HS-AC-KNX-16 INKNXHIS064O000 HS-AC-KNX-64 © HMS Industrial Networks S.L.U - All rights reserved https://www.intesis.com This information is subject to change without notice 3 / 30...
-
Page 4: Table Of Contents
7 AC Unit Types compatibility ..........................23 8 Error codes for Indoor and Outdoor Units ......................24 9 Appendix A – Communication Objects Table ..................... 27 © HMS Industrial Networks S.L.U - All rights reserved https://www.intesis.com This information is subject to change without notice... -
Page 5: Description
This document assumes that the user is familiar with KNX and Hisense technologies and their technical terms. Integration of Hisense VRF systems into KNX control systems © HMS Industrial Networks S.L.U - All rights reserved https://www.intesis.com This information is subject to change without notice... -
Page 6: Functionality
Outdoor Unit status • Status • Status • Command Indoor Unit • Communication status • Command General signals (all units) © HMS Industrial Networks S.L.U - All rights reserved https://www.intesis.com This information is subject to change without notice 6 / 30... -
Page 7: Capacity Of Intesis
Their order codes are: ▪ INKNXHIS016O000: Model supporting up to 16 indoor units ▪ INKNXHIS064O000: Model supporting up to 64 indoor units © HMS Industrial Networks S.L.U - All rights reserved https://www.intesis.com This information is subject to change without notice 7 / 30... -
Page 8: Knx System
A – C See list of communication objects in section PPENDIX OMMUNICATION BJECTS ABLE © HMS Industrial Networks S.L.U - All rights reserved https://www.intesis.com This information is subject to change without notice 8 / 30... -
Page 9: Connections
Connect a USB storage device (not a HDD) if required. Check the user manual for more information. Ensure proper space for all connectors when mounted (see section 6) © HMS Industrial Networks S.L.U - All rights reserved https://www.intesis.com This information is subject to change without notice... -
Page 10: Power Device
Ethernet: Using the Ethernet port of Intesis. • USB: Using the console port of Intesis, connect a USB cable from the console port to the PC. © HMS Industrial Networks S.L.U - All rights reserved https://www.intesis.com This information is subject to change without notice... -
Page 11: Set-Up Process And Troubleshooting
Intesis. Connectors, connection cables, PC to use the configuration tool and other auxiliary material, if needed, are not supplied by HMS Networks SLU for this standard integration. Items supplied by HMS Networks for this integration are: • Intesis gateway. -
Page 12: Configuration Tab
Figure 4.2 Intesis MAPS configuration tab 4.2.4 KNX configuration Set parameters of KNX interface of Intesis. Figure 4.3 Intesis MAPS KNX configuration tab © HMS Industrial Networks S.L.U - All rights reserved https://www.intesis.com This information is subject to change without notice 12 / 30... - Page 13 KNX will not necessarily be the same (actually, user will not be able to operate setpoint from AC System controllers as the remote controller). © HMS Industrial Networks S.L.U - All rights reserved https://www.intesis.com This information is subject to change without notice...
- Page 14 4.4. Use of 1-bit Fan Speed. 1-bit Control Objects. Enables a bit-type object for control of Vanes Positions. 4.5. Use of 1-bit Fan Speed. 1-bit Status Objects. Enables a bit-type object for monitoring of each Vanes Position. © HMS Industrial Networks S.L.U - All rights reserved https://www.intesis.com This information is subject to change without notice...
-
Page 15: Hisense Configuration
Additional to manual entry of each unit, autodiscover of present units in an H-Link installation is possible. To do so, click button Scan. Following window will appear: © HMS Industrial Networks S.L.U - All rights reserved https://www.intesis.com This information is subject to change without notice... - Page 16 Select with its checkbox units to add (or replace) in installation, according to selection Replace Units / Add Units. After units to be integrated are selected, click button Apply, and changes will appear in previous Units Configuration window. © HMS Industrial Networks S.L.U - All rights reserved https://www.intesis.com This information is subject to change without notice...
-
Page 17: Signals
All available KNX objects, its corresponding description and other main parameters are listed in the signals tab. Figure 4.8 Intesis MAPS Signals tab © HMS Industrial Networks S.L.U - All rights reserved https://www.intesis.com This information is subject to change without notice... -
Page 18: Sending The Configuration To Intesis
Console viewer for general information about communications and the gateway status and finally a Signals Viewer to simulate the BMS behavior or to check the current values in the system. © HMS Industrial Networks S.L.U - All rights reserved https://www.intesis.com This information is subject to change without notice... - Page 19 User Manual r1.1 EN Figure 4.10 Diagnostic More information about the Diagnostic section can be found in the Configuration Tool manual. © HMS Industrial Networks S.L.U - All rights reserved https://www.intesis.com This information is subject to change without notice 19 / 30...
-
Page 20: Set-Up Procedure
Figure 4.11 Enable COMMS 5 Electrical & Mechanical Features © HMS Industrial Networks S.L.U - All rights reserved https://www.intesis.com This information is subject to change without notice... - Page 21 1500VDC isolation from other ports 1 x DIP-Switch for PORT B configuration: Switch B Reserved for future use (leave OFF, default) (SWB) © HMS Industrial Networks S.L.U - All rights reserved https://www.intesis.com This information is subject to change without notice 21 / 30...
-
Page 22: Dimensions
Recommended available space for its installation into a cabinet (wall or DIN rail mounting), with space enough for external connections 100 mm (h) 100 mm (w) 130 mm (d) © HMS Industrial Networks S.L.U - All rights reserved https://www.intesis.com This information is subject to change without notice 22 / 30... -
Page 23: Ac Unit Types Compatibility
A list of Hisense unit model references compatible with INKNXHIS016O000 / INKNXHIS064O000 and their available features can be found in: https://www.intesis.com/docs/compatibilities/inxxxhis001r000_compatibility © HMS Industrial Networks S.L.U - All rights reserved https://www.intesis.com This information is subject to change without notice 23 / 30... -
Page 24: Error Codes For Indoor And Outdoor Units
Outdoor Units (Sub Units) in Same Setting Outdoor Unit Refrigerant! Cycle System Two (or more) Outdoor Units Set lncorrect Outdoor Unit Main Unit © HMS Industrial Networks S.L.U - All rights reserved https://www.intesis.com This information is subject to change without notice 24 / 30... - Page 25 Activation of Low Pressure Decrease lnsuffcient Refrigerant!, Refrigerant! Piping, Protection Device (Vacuum Operation Clogging, Expansion Valve Locking at Open Protection) Position (Loose Connector) © HMS Industrial Networks S.L.U - All rights reserved https://www.intesis.com This information is subject to change without notice 25 / 30...
- Page 26 Switch Box Unit The indoor units of different refrigerant! cycle is connected to Switch Box unit. lncorrect lndoor Unit Connection © HMS Industrial Networks S.L.U - All rights reserved https://www.intesis.com This information is subject to change without notice 26 / 30...
-
Page 27: Appendix A - Communication Objects Table
0-Cool, 1-Heat Status _Mode Cool/Heat 1 bit DPT_Heat/Cool 1.100 0-Cool, 1-Heat Control _Heat mode&ON 1 byte DPT_Scaling 5.001 0%-Off, 1%-100%-On+Heat © HMS Industrial Networks S.L.U - All rights reserved https://www.intesis.com This information is subject to change without notice 27 / 30... - Page 28 Status_Vane position enumerated 1 byte Non-standarized 1-Position 1..7-Position 7 VANE POS Thersholds(0..21%;22..36%;37..50%;51..64%;65..79%;8 Control_Vane position scaling 1 byte DPT_Scaling 5.001 0..93%; 94..100%) © HMS Industrial Networks S.L.U - All rights reserved https://www.intesis.com This information is subject to change without notice 28 / 30...
- Page 29 ERROR CODE Status_Unit error code 2 byte Non-standarized 0-No Error, X-Error (100..999) Status_FilterSign 1 bit DPT_Alarm 1.005 0-Normal, 1-Alarm FILTER © HMS Industrial Networks S.L.U - All rights reserved https://www.intesis.com This information is subject to change without notice 29 / 30...
- Page 30 Status_RC SW Temperature (ºC) 2 byte DPT_Value_Temp 9.001 -63..63 ºC Status_RC SW Configuration 1 bit DPT_Switch 1.001 0-Without RCS, 1-With RCS © HMS Industrial Networks S.L.U - All rights reserved https://www.intesis.com This information is subject to change without notice 30 / 30...
Need help?
Do you have a question about the Intesis KNX - Hisense VRF and is the answer not in the manual?
Questions and answers