Adjusting The Throttle Cable Free Play; Adjusting The Speed Limiter - Yamaha RAPTOR YFM125RA Service Manual

EAS20660
ADJUSTING THE THROTTLE CABLE FREE
PLAY
TIP
Prior to adjusting the throttle cable free play,
the engine idling speed should be adjusted.
1. Check:
• Throttle cable free play "a"
Out of specification → Adjust.
Throttle cable free play
2.0–4.0 mm (0.08–0.16 in)
2. Adjust:
• Throttle cable free play
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
Carburetor side
a. Slide back the rubber cover "1".
b. Loosen the locknut "2".
c. Turn the adjusting nut "3" in direction "a" or
"b" until the specified throttle cable free
play is obtained.
Direction "a"
Throttle cable free play is increased.
Direction "b"
Throttle cable free play is decreased.
d. Tighten the locknut.
e. Slide the rubber cover to its original posi-
tion.
PERIODIC MAINTENANCE
TIP
If the specified throttle cable free play cannot
be obtained on the carburetor side of the
cable, use the adjusting nut on the handlebar
side.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
Handlebar side
a. Slide back the rubber cover "1".
b. Loosen the locknut "2".
c. Turn the adjusting bolt "3" in direction "a" or
"b" until the specified throttle cable free
play is obtained.
Direction "a"
Throttle cable free play is increased.
Direction "b"
Throttle cable free play is decreased.
d. Tighten the locknut.
e. Slide the rubber cover to its original posi-
tion.
EWA12930
WARNING
After adjusting the throttle cable free play,
start the engine and turn the handlebar to
the right or left to ensure that this does not
cause the engine idling speed to change.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
EAS29170

ADJUSTING THE SPEED LIMITER

The speed limiter keeps the carburetor throttle
from becoming fully-opened even when the
throttle lever is applied to the maximum posi-
tion. Screwing in the adjusting screw stops the
engine speed from increasing.
1. Measure:
• Speed limiter length "a"
Out of specification → Adjust.
3-24