Chapter 6
Connect DSAM
Serial Access With Dominion Serial Access
Module
Connecting a KX III and a Dominion Serial Access Module (DSAM) provides
access to devices such as LAN switches and routers that have a RS-232 serial
port.
The DSAM is a 2- or 4 port serial module that derives power from the KX III.
Connect a maximum of 2 DSAM modules to the KX III using USB cables. DSAM
can be mounted in a 0U configuration.
In This Chapter
Connect DSAM .................................................................................................. 118
View DSAM Serial Ports .................................................................................... 122
Upgrade DSAM Firmware ................................................................................. 126
Browser Tips for HSC ........................................................................................ 131
1. Connect the DSAM unit's USB cable to the TOP USB port on the rear of KX
III device. Additional DSAM units can be added at any other USB port.
118