Using The Stop Switch - Brother BAS-311H Basic Operation Manual

7-2. Using the STOP switch

If you press the STOP switch (1) while sewing or test feeding is in progress, the CAUTION indicator (2) will illuminate and
the sewing machine will stop immediately.
3112B
<Continuing sewing from a stopping point>
If you have pressed the STOP switch (1) at times such as if the thread breaks while sewing or the lower thread runs out, you
can resume sewing from the point where the thread ran out.
1
2
3
2nd step
<Clearing>
3111B
1. Press the RESET key (3).
• The thread will be trimmed, and then the CAUTION
indicator (2) will switch off and the buzzer will stop
sounding.
2. If you do not wish to continue sewing, press the RESET
key (3) once more.
• The program number will flash. Carry out preparation
for the next sewing.
Press the RESET key.
• The thread will be trimmed, and then the CAUTION indicator will switch
off and the buzzer will stop sounding.
Press the key to return to the position where sewing stopped.
• When you press the
one stitch at a time, and when you press the
one stitch at a time. (The feed will move quicker if you keep the key
pressed down.)
Depress the foot switch to the 2nd step.
(If using a two-pedal foot switch, depress the start switch.)
•
The sewing machine will start operating and sewing will start.
BAS-311H
key, the feed mechanism will move backward
key, it will move forward
7. SEWING
3113B
4441Q
41