(Ix-8Psub-1); Sixteen-Port Digital Station Card; (Ix-16Psub-2) - Iwatsu ICON Series IX-5910 Owner's Manual

(IX-8PSUB-1)

An IX-8PSUB-1 card provides eight station terminal ports for Attendant
Consoles, DSS Units and Digital Telephones that are connected through star
wiring. Each port connects the station terminal with a two-wire cable that
carries bi-directional data transmission (ping-pong transmission).
Ports: 8 ports/card.
Stations: 2 ports required for: IX-ATT,
1 port required for: Platinum 18d, Platinum 12d, Platinum DSS, IX-DSS-3,
IX-BLF, IX-KTD/S-3, IX-12KTD-2, DCKT970 (may
share a port with a key telephone), IX-DCKT900 (may
share a port with a key telephone), IX-MKT, IX-
COMLINK-2, IX-DDPH, IX-BLF, IX-MSGU (per
channel), IX-BPAD, and IX-BPCU.

SIXTEEN-PORT DIGITAL STATION CARD

(IX-16PSUB-2)

The IX-16PSUB-2 is designed specifically for the IX-5800 and IX-5810
Digital Key Telephones. This card is the interface for up to 16 IX-5800
and/or IX-5810 digital stations to the ECS. Each circuit of the IX-16PSUB-2
card is star connected to an IX-5800 or IX-5810 digital telephone using
#22/24 AWG one-pair twisted cable. Single-pair cable allows for bi-
directional data transmission or ping-pong transmission. The loop limit of
ECS digital station terminals is 1,000 feet. The loop limit can be extended to
a maximum of 2,100 feet using the optional IX-58EXTENDER installed in
the KT.
Ports: 16 ports/card
Stations: 1 port required for: IX-5800/IX-5810
Note: Legacy Iwatsu telephones and devices, including the DCKT970, DDPH
doorphone, PSUBMDM, IX-12KTD-3, Platinum 18d and 12d are not
compatible with the IX-8PSUB-2 or IX-16PSUB-2. These telephones may
only be connected to the IX-16PSUB, IX-8PSUB, IX-408, or IX-044 cards.
GENERAL DESCRIPTION - 43