To register Personal Speed Dial Numbers (without an outside line group):
Lift the receiver.
Wait for the dial tone.
Dial the Speed Dial Registration code
Dial the Personal Speed Dial code
Wait for the dial tone.
Dial the phone number.
Hang up.
Repeat the procedure to enter additional numbers.
To register a pause:
When registering the telephone number, at the place where you
want to insert a pause:
.
Dial
-
Dial
Note: This feature may not be used on ISDN PRI or ISDN BRI lines.
To register the
symbol in a number:
When registering the telephone number, at the place where you
want to insert a
.
Dial
Note:
may not be used on ISDN PRI or ISDN BRI lines.
TO SPEED DIAL A NUMBER
Operation
If you have a Touch-tone Phone:
Lift the receiver.
Wait for the dial tone.
.
Dial
Dial the Speed Dial code.
The system will automatically dial the registered number.
If you have a Rotary Dial Phone:
Lift the receiver.
Wait for the dial tone.
Dial the Speed Dial Access code
Dial the Speed Dial code.
The system will automatically dial the registered number.
SIP & SINGLE LINE TELEPHONE USER GUIDE - 345
for the desired pause time in seconds.
:
.
-
.
.