RECEIVING AN INTERCOM CALL
Internal or intercom calls will light the Operator key OPER at the Console.
Operation
To answer an intercom call:
Lift the receiver
Press the red flashing Operator key OPER
PUTTING A CALL ON HOLD
Operation
To put a call on Hold:
Press the Hold key HOLD
The lamp on the key representing that call will intermittently flash
green
PICKING UP A CALL ON HOLD
Operation
To retrieve a call on Hold:
Press the key representing the call you wish to speak with
PUTTING A CALL ON CALL PARK
When you cannot locate an extension user you may page the desired
individual. This feature allows the outside call to be automatically placed in
a Call Park Orbit when the Page key is depressed. The display on the
Attendant Console will show the park number the call has been placed in to
allow the attendant to announce where the call is parked.
Operation
When speaking to an outside party:
Press the Page key PAGE
Make an announcement stating which park number the call is
in
Press the Release key RLS to disconnect the paging circuit
ATTENDANT CONSOLE USER GUIDE - 295