Ix-6Ipktd-E Ip Telephone (Discontinued) - Iwatsu ICON Series IX-5910 Owner's Manual

IX-6IPKTD-E IP TELEPHONE (DISCONTINUED)

The IX-6IPKTD-E IP Telephone provides complete access to the Iwatsu
Enterprise-CS feature set from an Ethernet connection. Each IX-6IPKTD-E
IP Telephone requires an IP address that is either dynamically allocated by
the network DHCP server or is a static IP address.
The IX-6IPKTD-E IP Telephones require an available channel on an IX-
MBU Media Bridge Unit card to communicate with TDM resources. IX-
6IPKTD-E-to-IX-6IPKTD-E and IX-6IPKTD-E-to-IX-12IPKTD-E calls do
not utilize a channel (bandwidth) on the IX-MBU to establish
communications, the IX-6IPKTD-E and/or IX-12IPKTD-E IP Telephones
are able to communicate peer-to-peer (via the IP Network).
The IX-6IPKTD-E IP Telephone includes an integrated Layer 2 switch that
was designed for the workstation user and allows the switching of data
within a LAN. Because the IX-6IPKTD-E IP Telephone is also a Layer 2
switch, a PC can connect to the back of the IX-6IPKTD-E IP Telephone
which allows all data to pass through the phone. When using the switching
capabilities of the IX-6IPKTD-E, voice quality does not suffer. However, it
is important to not use the switching capabilities for high load devices like a
file or database server. Only one PC connection is supported on the IX-
6IPKTD-E IP Telephone.
The IX-6IPKTD-E IP Telephone packages voice data through the UDP
datagram and sends the data on an IP network such as an Ethernet LAN or
VPN. Additionally, the IX-6IPKTD-E can be powered over the Ethernet, via
Power over Ethernet (PoE) Power Sourcing Equipment (PSE). See Power
over Ethernet in this section.
IX-6IPKTD-E IP Telephone, black and platinum gray
Note: Remote stations will operate in both a VPN or non-VPN
environment (Internet mode). Internet mode allows up to 64 IP
stations to operate remotely without a VPN connection.
IP TELEPHONE USER GUIDE - 120