Iwatsu ICON Series IX-5910 Owner's Manual page 125

Conference Call
The Iwatsu Enterprise-CS allows you to make conference calls with any
combination of up to four extensions and outside lines on the same call.
To Make a Conference Call:
While speaking on an outside or internal call:
Press the Conference key on the display (Conference will flash).
Make your next call (internal or outside call).
When the party you are calling answers, press the Conference key
again.
Note: If the station user places a call on hold using the Hold key, the
above conference feature will not function. The user must us the legacy
method for conferencing or pickup the call from Hold and use the
Conference key to place the call on hold.
Or
Press Park to park the call.
Make your next call.
Press Conference and then Park to complete
After you hear a tone burst, all parties are connected.
To add another extension or outside line, repeat the same procedure.
Directory
Your IX-5930/IX-5910 is equipped with a Directory for access to system
Internal, system External, Personal Speed Dial, and Direct Bin Access.
Internal (Internal Station Directory)
From the Self-Labeling Display Menu:
Press the Directory menu key on your display.
Press Internal.
Select an entry:
Select an entry on the screen.
Or
Select Search and use the dial pad to enter a search string.
Or
Select Navigate and use the left and right arrows to page through
the Internal Directory or use the up and down arrows to scroll one
entry at a time.
To make a call, select the key that corresponds to the entry you want to
call.
LED Status: Solid = Busy, flashing = DND, and no LED = available.
IP TELEPHONE USER GUIDE - 105
the conference.