Consultation Hold; Delayed Ringing; Did Number External Call Forward - Iwatsu ICON Series IX-5910 Owner's Manual

CONSULTATION HOLD

Places an outside call on temporary hold before a transfer or conference is
completed. The call will automatically return to you if the desired transfer
extension does not answer or if you dialed incorrectly. If you have a display
on your phone, the display will show Camp On RCL and the name of the
person that the call was sent to.
Operation
While on an outside call:
Press the Transfer key TRAN and you will hear the dial tone

DELAYED RINGING

When an incoming outside line call is not answered within a pre-set time, a
second group of stations start ringing and the ringing signal changes to an
incoming alarm. A delayed ringing assignment can be programmed for each
line. This assignment is the same for both Day and Night modes. If the line is
programmed for attendant outside line intercept, the primary and delayed
ringing stations will stop ringing when attendant intercept occurs.

DID NUMBER EXTERNAL CALL FORWARD

A station programmed for direct termination of a DID, Caller ID, ANI, or
DNIS call can be set to automatically forward the call to an external (remote)
telephone number. The remote telephone number is programmed in personal
speed dial bin 98. This feature will not operate if there is no number
programmed in person speed dial bin 98.
Operation
To set/cancel external call forward of DID, Caller ID, ANI and DNIS calls:
Press ICM
Press PTRAN
Wait for confirmation tone
The PTRAN key red LED is lit, remote call forward is set
The PTRAN key is not lit, remote call forward is canceled
To program the remote number:
Press the Feature key FEAT
Press the Speed Dial key SPEED
Dial Personal Speed Dial Code
Dial the remote phone number
Press the Feature key FEAT to end the operation
DIGITAL TELEPHONE USER GUIDE - 216