Bluetooth Environmental Conditions - Iwatsu ICON Series IX-5910 Owner's Manual

Bluetooth Environmental Conditions

The following environmental conditions will have an effect on the operation
of Bluetooth headsets and must be taken into consideration:
Number of Bluetooth devices within a 10 meter radius of the Bluetooth
enabled Iwatsu ICON Series telephone.
Number of WiFi devices within a 10 meter radius of the Bluetooth
enabled Iwatsu ICON Series telephone.
Distance of the Bluetooth headset from the Bluetooth enabled Iwatsu
ICON Series telephone.
Note: When the Motorola H550 headset is taken out of range and then
returned within range of the paired key telephone, the H550 headset LED will
flash red and you will hear a beep approximately every 30 seconds. To clear
this state, power the headset off and then on and wait for the headset to
reconnect.
Operation
To Discover (pair), connect, and disconnect a Bluetooth headset:
Note: Follow the Bluetooth manufacturers instructions to prepare your
Bluetooth device for pairing. Your Bluetooth device must be in the pairing
mode before beginning this procedure.
Note: Only one Bluetooth device can be paired to the telephone. If another
Bluetooth device is paired to the same telephone, the previous pairing
information is overwritten.
Press the Setup Menu key on the IX-5810 Key telephone
Press Bluetooth
If Bluetooth does not appear on your LCD, you do not have the
optional IX-58BTINF Bluetooth module installed in you
telephone
Press Discover
During the discovery process, Searching will flash on your
display
When the discovery process is complete, available Bluetooth
devices will appear on the display
Select the key that corresponds to the name of the Bluetooth
device your are pairing
DIGITAL TELEPHONE USER GUIDE - 198