CLOCK SET/ADJUSTMENT
Allows you to change the time for the system clock.
Operation
This feature is performed by using the display and the Soft Function keys.
To get to the Clock Set/Adjustment prompts:
Press the ETC key three times and the display will show:
CLK
F1
Press the F1 CLK key and the display will show:
Set Time H H :M M
ADJ
F1
To change the time:
Dial the time in military time H H :M M
Press the Release key END
To adjust the seconds to zero:
Press the F1 ADJ key and the display will show:
Clock Adjustment
SET
F1
Press the F1 SET key to start the clock with zero seconds
elapsed.
Press the Release key END
If the seconds shown on the display are less than 30 the minutes
digit will remain the same. If the seconds shown on the display are
greater than 30, the minutes digit will advance one digit.
DIRECT STATION SELECTION
Allows you to have one-touch access to call extensions. There are 30 Direct
Station Selection (DSS) keys on the Console.
Operation
When you wish to call an extension:
Lift the receiver
Press the Direct Station Selection key for the desired extension
ATTENDANT CONSOLE USER GUIDE - 301
VSSR
F2
F3
F4
F5
F2
F3
F4
F5
F2
F3
F4
F5
F6
F6
F6